Home
How To Clean Rugs-Area Rugs, Oriental Rugs, And More

How To Clean Rugs-Area Rugs, Oriental Rugs, And More

Could your area rugs need a deep cleaning? It’s easy to bring all your floor coverings back in shape by learning how to clean them yourself. Area rugs can be a focal point of a room, but they can also get damaged from foot traffic, pets and spills. Sometimes vacuuming isn’t enough. Knowing how to do it yourself can make the difference between a clean and messy room.

It is easy to clean an area rug yourself. You don’t have to hire professional rug cleaners unless your rug has an extremely delicate condition, an antique rug, or an oriental rug.

Do not schedule rugs’ cleaning. Instead, it is better to clean rugs when they have visible dirt or odor. Find out how to refresh worn-out area rugs so that they look the same as when you first unrolled them.

  1. Collect Your Tools And Supplies

Here’s what you need to know to make a successful area rug clean:

  • Rug shampoo or mild dish soap
  • Bucket
  • Soft-bristle sponge brush
  • Water

Optional:

  • Rubber gloves
  • Garden hose
  • The vacuum can be used wet or dry
  1. Clean Up Dirt And Debris

Thoroughly vacuum the rug on both edges. You want to remove all traces of dirt. For pets: Use the brush attachment to remove any remaining hairs.

  1. Mix Your Cleaner

If you need a rug shampoo, this one is from. No matter which shampoo you choose, be sure to follow the label directions for mixing.

Another option is to use mild dish detergent with warm water in a small bucket.

  1. Do A Color Test

Before you begin to scrub, make sure the cleaner won’t cause the color to run. To ensure that the cleaner does not cause the color to run, test the solution on one corner of the rug. If the color doesn’t bleed, you can proceed to the next steps.

  1. Wash The Rug

Use a sponge and soft-bristle brushes to spread the cleaning solution on the rug. The cleaner should sit on the rug at least five minutes before beginning to rinse. The cleaning process will be sped up if the cleaner does not do this. Give it those five minutes to settle in before you begin to clean up the dirt.

  1. Rinse The Rug

Rinse the soap from your rug using a garden hose, or buckets of water. Make sure you have completely rinsed the rug of the cleaning solution and that any runoff water is removed.

  1. Take Out Excess Water

You’ll need to get rid of as much water out of the rug as possible in order for it to dry faster. You can either use a wet/dry vacuum if it is available, or you can use a squeegee along the nap.

  1. Let The Rug Dry

Let the area rug dry before you clean it. Lay the rug flat, and allow it to dry completely. Flip the rug over so that the bottom side is dry. Fans can help speed up the process. Before you bring the rug back to your home, ensure it is fully dried.

  1. Vacuum Or Brush The Rug

It is possible for threads or fibers to get compressed and squished in the cleaning process. Use a vacuum and brush the rug with a soft-bristled toothbrush to restore them. You’re done and you can now enjoy your newly cleaned carpet. You can clean an area rug easily by yourself.

You can buy a rug from our website, including custom logo rugs, an area rug and many other types.